You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Page index
  1. Optical Service creation
  2. Add a missing port

NOCLook Cookbook

Don't be afraid to try these recipes out on nidev-consumer.nordu.net, if anything breaks it needs to get fixed.

Optical Service creation

The sequence for creating a new optical patch, seen from a documentation POI:

  • Consult DWDM planning drawing to find free slot in nodes
  • Consult channel planning sheet to find free channel
  • Onsite work: required patch cables are labeled according to "Michael/Bergroths rules"
    Patch ID's are put into editgrid, reference is made only to physical objects; port names, ODF, rack ID etc.

These steps are the same as before.

In the left menu click Create new and choose NORDUnet Optical Link from the following page.
Fill out the form and click Save. You will be sent to the newly created Link.
Click Edit and on the following page:
Set Provider to NORDUnet.
Under Link depends on you can add what the link depends on. You should select a port.

  • In the first box select the correct site.
  • In the second box select correct rack or equipment.
  • In the following box select the correct port.
  • Do the same for a second port if necessary.
  • Click Save at the bottom of the page.

If the port is not documented at the time of link creation you can click the button labeled Add port.

Obtain new Path ID (NU-4xxxxxx) and document the path

In the left menu click Create new and choose NORDUnet Optical Path from the following page.
Fill out the form and click Save. You will be sent to the newly created path.
Click Edit and on the following page:
Set Provider to NORDUnet.
Under Path depends on you can add a link this path depends on. Do not forget to add the OPS link(s) that the path depends on. (You should later be able to select more than one link at the time)
Click Save.

Obtain a new Service ID (NU-Sxxxxxx) and document the service

In the left menu click Create new and choose NORDUnet Service from the following page.
Fill out the form and click Save. You will be sent to the newly created Link.
Click Edit and on the following page:
Set Provider to NORDUnet.
Set Customer and End User. Customer is the organization paying for the service, end user is the actual user that the NOC might be in contact with.
Under Service depends on you can add the path and external service the service depends on. (You should later be able to select more than one dependency at the time)
Click Save.

Add a missing port

Make sure that the equipment you want to add a port to is the last selected thing in the drop down list, see image below.

The Add port button will open a new browser window where you should write the port name and set it's type.

The port name should be in the Alcatel-Lucent format for Optical Nodes, rXsrXslX/port#X and in Juniper format for routers aeX, ge-X/X/X, so-X/X/X, ....

Click Save and you can close the window.

To be able to select the newly created port please choose another equipment in the drop down-list and reselect the one you want to reload it's ports. (This will be fixed...)

Please give me a call or send me an e-mail if you find that you want to make a port in something that is not mentioned above. (lundberg@nordu.net)

  • No labels