...
- Consult DWDM planning drawing to find free slot in nodes
- Consult channel planning sheet to find free channel
- Onsite work: required patch cables are labeled according to "Michael/Bergroths rules"
Patch ID's are put into editgrid, reference is made only to physical objects; port names, ODF, rack ID etc.
These above steps are the same as before.
Obtain a new Link ID (NU-1xxxxxx) for both ends and document the links
How to
In the left menu click Create new and choose NORDUnet Optical Link from the following page.
Fill out the form and click Save. You will be sent to the newly created Link.
Click Edit and on the following page:
Set Provider to NORDUnet.
Under Link depends on you can add what the link depends on. You should select a port.
- In the first box select the correct site.
- In the second box select correct rack or equipment.
- In the following box select the correct port.
- Do the same for a second port if necessary.
- Click Save at the bottom of the page.
If the port is not documented at the time of link creation you can click the button labeled Add port.
Obtain new Path ID (NU-4xxxxxx) and document the path
...
Obtain a new Service ID (NU-Sxxxxxx) and document the service
How to
| Anchor | ||||
|---|---|---|---|---|
|
Add a missing port
The Add port button will open a new browser window where you should write the port name and set it's type.
The port name should be in the Alcatel-Lucent format for Optical Nodes, rXsrXslX/port#X and in Juniper format for routers aeX, ge-X/X/X, so-X/X/X, ....
Click Save and you can close the window.
Please give me a call or send me an e-mail if you find that you want to make a port in something that is not mentioned above. (lundberg@nordu.net)